Hoselink Garden Hose Reels Australia | Buy Hose Reels (2024)

FAQs

Is Hoselink Australian made? ›

Hoselink is a 100% Australian owned family-run business. Our products are manufactured in various locations including but not limited to Australia (Fertilisers and Drinking Water Hoses), Taiwan and China.

Quality. There's a good reason most people give Hoselink hose reels 5/5 star ratings and say that it's the only brand of hose they will buy — quality! These hoses do what they say, are reliable and easy to use. Every element of the hose is made to the highest quality, offering long-term performance.

Accidentally cut the hose with a tool or ran over it with the lawnmower? You can now fix any small hose using the 12mm Retractable Reel Hose Repair Kit. This kit will enable you to cut out and repair the damaged hose section, so you can continue to use your hose reel.

Fire, Electrical & Safety Compliance Services Australia-wide

With a standard fully extended length of 36 metres, Fire Hose Reels are designed to deliver a minimum of 0.33 litres of water per second. A four meter stream should be reached from the nozzle with the flow requirements being met.

We get asked this occasionally but no, none of our products carry a lifetime warranty. Due to the unique design of Hoselink hose fittings, we can and do guarantee that a correctly fitted Hose Connector will never burst off your hose.

From breaking point to national success, it's not been a smooth journey for Hoselink founder Tim Kierath.

Pressure Washers

Hoselink fittings are compatible with Gerni, Karcher and other brands of pressure cleaners to ensure a secure and stable connection between the hose and machine.

Because of the design, all retractable hose reels will reduce water pressure to varying degrees. With the larger diameter hose in the Hi-flow model, we've calculated a 25% better water flow rate in comparison to our standard models.

On average a good hose reel should last about 5-10 years, with good care and cleaning, in which I did, as these are not cheap hoses.

If the hose is not locking when extended, it may be that the locking mechanism is a little stiff and needs assistance to engage for the first time. To resolve: Turn the reel on its side with the leader hose side up. Do this on a soft surface such as grass or carpet so the reel is not damaged.

Why is my Hoselink not fully retracting? ›

Hose cannot be retracted or extended

This may occur if the hose has lapped over itself. The hose will need to be pulled until fully extended. Brace the unit with one hand and pull with force until untangled.

Fire hose reels do have a couple of disadvantages which are important to considerations when choosing to install a fire hose reel. The first issue is that if used inside you cannot close any fire door that the hose has passed through so increasing the risk of fire spreading. The second consideration is the trip hazard.

Hose reel placement is covered by the Building Code of Australia (BCA). Hose reels should only be connected to a dedicated fire line, not the water mains. Should be a minimum of 100mm clearance around all points of hose drum. Valve height should be between 900mm & 1100mm from floor level.

Here are some of the requirements for fire hose reel installation in Australia as per Australian Standard AS2441: Water discharge should be at 0.45 litres per second when attached to an inlet with pressure of approximately 220 kPa.

Holman is an Australian family-owned business with two modern PVC moulding facilities, in Perth and Brisbane and a significant fabrication plant in Stapylton, near the Gold Coast in QLD that allows for over 300 specialty fittings to be produced.

Where is Hoselink 's headquarters? Hoselink is located in Brookvale, New South Wales, Australia .

Over 75% of our products are made in Britain. With the remaining 25% built in our overseas factories in France, Malaysia, Taiwan, and China.